Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Silosan Silosil Silicone Flat product.
It can be easily applied on concrete, plaster, screed plaster, exposed concrete, aerated concrete, briquette, comb mosaic, betopan and old painted surfaces after the recommended floor formation and priming process.
The surfaces to be applied must be dry, clean and free of dust. Old and swollen painted surfaces should be scraped and cleaned. Newly plastered surfaces should be waited for at least 4 weeks before application. Damaged and loose surfaces and surfaces with hairline cracks should be putty with “Düfa Acrylic Exterior Putty”. It is recommended to use a single coat of "Silosan Silicone Covering Primer" or "Silosan Silicone White Primer" as a primer in case of color changes, to reduce the consumption of topcoat paint after the correction process, to increase the adhesion of the paint to the surface. The surfaces to be applied should be protected against precipitation and frost in order to avoid drying problems. If the application will be made at temperatures above 35°C and between 12-16 hours, the surfaces of the buildings that are not exposed to the sun should be preferred. "Silosan Silosil Silicone" is applied to the surfaces on which primer application has been made, after thinning with water at the rate of maximum 10% and applied in 2 layers with a roller or brush. Waiting time between coats is 5-6 hours (may vary according to ambient temperature). Application temperature should be between 5˚C and 35˚C.
Dry to the touch: 1–2 hours.
Waiting between coats: 5-6 hours.
Complete drying: 24 hours. (23°C and 50% Humidity)
Depending on the absorbency and type of the surface, 9-11 m² lt area is painted in one coat. For exact consumption, field sample study should be done.