Diamond Silicone Int&Ext Cover Primer

Brand: DÜFA

It is a water-based, acrylic emulsion-based and silicone-added, filled interior and exterior coating primer. With its high water vapor permeability, it allows the moisture to escape and allows the buildings to breathe. It has high adherence (adhesion) feature. It increases the adhesion of the paint to be applied on it by creating a solid base. Since it is filled, it increases the covering of the top coat paint and reduces its consumption.

Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Diamond Silicone Int&Ext Cover Primer product.

It can be easily applied on concrete, plaster, screed plaster, exposed concrete, gas concrete, briquette, comb mosaic and betopan surfaces. The surfaces to be applied must be dry, clean and free of dust.

The surfaces to be applied must be dry, clean and free of dust. Old and swollen painted surfaces should be scraped and cleaned. Newly plastered surfaces should be waited for at least 4 weeks before application. Damaged and loose surfaces and surfaces with hairline cracks should be putty with “Düfa Acrylic Exterior Putty”. It is recommended to use a single coat after the correction process, to reduce the consumption of the last coat, to increase the adhesion of the paint to the surface and for color changes. The surfaces to be applied should be protected against precipitation and frost in order to avoid drying problems. If the application is to be made at temperatures above 35 °C and between 12 and 16 hours, the surfaces of the buildings that are not exposed to the sun should be preferred.
“Diamond Silicone Inner & Outer Primer” is thinned with water at a maximum of 10% and applied in one layer with a roller or brush. Application temperature 5˚C to 35˚C

Before topcoat: 6–8 hours (23 °C and 50% Humidity)

Depending on the absorbency and type of the surface, 12-16 m²/lt area is painted in one coat. For exact consumption, field sample study should be done.