Corrugated Sheet | 110-233 High Pitch

The single layer High Pitch Corrugated Sheet manufactured from galvanize or aluminum. The special production form is used on roof and exteriors as well as a mold under reinforced concrete. With a special pitch height this corrugated sheet eliminates the need for purlins in roof constructions due to its ability to pass over two gaps from truss to truss on steel roofs providing important advantages in details and labor. The corrugated form enables use over long gaps as well as bottom coating in onsite application of double layer systems. Especially when Perforated High Pitch Corrugated Sheet is used it is possible to absorb the sound in the building. The perforated form captures the sound inside and prevents echoing. Recommended for especially noisy and crowded conditions (like airports, etc.).

Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Corrugated Sheet | 110-233 High Pitch product.

• Industrial Buildings
• Military Buildings
• Public Buildings
• Agricultural Buildings
• Sports Facilities
• Construction Site Buildings
• Silos
• Hypermarkets
• Shopping Centers
• Storehouse Halls
• Administrative Buildings, and all other concrete structures with steel or prefabricated load bearing systems.

• Prepainted Galvanized Steel Surface
• Modular Width 685 mm
• Minimum Length 1 m
• Maximum Length Depends on transport conditions.
• Type Prepainted Galvanized Steel
• Sheet Thickness 0,70-1,50 mm
• Steel Surface Yield Strength min. 220 N/mm2
• Thickness Tolerance (EN 10143) Nominal
• Length Tolerance ±3 mm
• Steel Quality (EN 10327) Dx51 D+Z Prepainted Galvanized Steel (last coat polyester paint on primer
• Hot Dipped Coated Steel Grade (EN 10327) 100-275 gr/m2
• Paint Type Polyester, PvdF, Plastisol, PVC

ISO 9001, ISO14001, ISO27001, GOST-R Corrugated Sheet