Slim Design Structural Glazing Silicone | SG250
Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Slim Design Structural Glazing Silicone | SG250 product.
SG250 is designed for bonding glass units to metal frames in structural facade applications (bonded glass).
Thanks to its superior design stress, it is suitable for applications where excessive loads are applied and/or where thin joint designs are required. SG250 can be used as a secondary sealant in the production of insulated glass units where the system requires it (e.g., Toggle systems with metal strips).
• It cures quickly. The cured material has good mechanical properties and is resistant to weathering, UV rays and aging.
• Superior mechanical resistance.
• Enables the design of joints with thin sections with higher design stress.
• Excellent adhesion to metallic surfaces such as glass, aluminum and stainless steel.
• Good aging resistance to UV, moisture and temperature.
• High thixotropic behavior. (no sagging in application, easy application)
• Designed and approved for bonded glass applications exposed to direct ultraviolet rays.
• Non-corrosive and odorless curing.
• High mechanical strength at low elongation, high Shore A hardness and high elastic recovery.
Conformity and approvals.
EN 1279-2, -3, -4 and ETAG 002
