Slim Design Structural Glazing Silicone | SG250
Overview
It is a high-modulus, two-component, ethanol-releasing, elastomeric, neutral-curing structural bonding silicone with sustained performance and superior mechanical resistance.
Technical Specifications
- - It cures quickly. The cured material has good mechanical properties and is resistant to weathering, UV rays and aging.
- - Superior mechanical resistance.
- - Enables the design of joints with thin sections with higher design stress.
- - Excellent adhesion to metallic surfaces such as glass, aluminum and stainless steel.
- - Good aging resistance to UV, moisture and temperature.
- - High thixotropic behavior. (no sagging in application, easy application)
- - Designed and approved for bonded glass applications exposed to direct ultraviolet rays.
- - Non-corrosive and odorless curing.
- - High mechanical strength at low elongation, high Shore A hardness and high elastic recovery.
Product Features
| Usage Location |
|
|---|---|
| Documents, Certificates and Compliance |
|
| Product Physical Properties |
|
Application Areas
- - SG250 is designed for bonding glass units to metal frames in structural facade applications (bonded glass).
- - Thanks to its superior design stress, it is suitable for applications where excessive loads are applied and/or where thin joint designs are required. SG250 can be used as a secondary sealant in the production of insulated glass units where the system requires it (e.g., Toggle systems with metal strips).
Documents
- Conformity and approvals
- EN 1279-2
- -3
- -4 and ETAG 002
Tremco CPG Products
Joint Sealants
Request a quote for this product
Tremco CPG
Slim Design Structural Glazing Silicone | SG250