Sikafloor®-235 ESD
Overview
Decorative and protective electrostatically conductive self-leveling epoxy based floor coating for concrete and cement screeds that can be used on floors subject to normal to medium loads.
Technical Specifications
- - It is a two-component, hard elastic, self-leveling, colored epoxy resin coating.
- - Body voltage measurement <30 V.
- - Good mechanical and chemical resistance.
- - It is easy to apply and clean.
- - It is liquid impermeable.
- - Meets general ESD requirements.
- - Cleanroom Suitable Materials approved.
- - Meets ESD requirements under 25% relative humidity and + 23 ° C conditions.
Product Features
| Usage Location |
|
|---|---|
| Documents, Certificates and Compliance |
|
| Product Physical Properties |
|
| Durability, Lifespan and Maintenance Properties |
|
Application Areas
- - Especially suitable for areas with low electrostatic requirements (body voltage) and dissipative conductive surfaces.
- - Typical application areas include production, storage areas and warehouses in industries such as logistics, clean rooms, pharmaceuticals and automotive.
Documents
- According to EN 1504-2: 2004 and EN 13813
- Factory Production Control was made by the notified body 0921 and CE certification was made as a self-leveling
- colored epoxy coating. Certificate No .: DoP 02 08 01 02 037 0000005 2017
- Testing of electrostatic properties according to IEC 61340-5-1. Polymer Institute
- Test Report P 4956-1-E
- November 2007
- Test of electrostatic properties according to IEC 61340-5-1
- SP Institute
- Test Report F900355: B
- February 2009
- Meets the requirements of ANSI
- ESD S20.20-2007 and IEC 61340-5-1. (Internal test)
- Fire classification according to EN 13501-1
- Report-No. 2007-B-0181/18
- MPA Dresden
- Germany
- May 2007
- Sikafloor-235 ESD particle emission certificate CSM Quality Certification
- ISO 14644-1
- class 4
- Report No. SI 0706-406 and GMP class A
- Report No. SI1008-533
- Sikafloor-235 ESD degassing certificate CSM Quality Certification
- ISO 14644-8
- class 6.8- Report No SI 0706-406
- BMW-Standard 09-09-132-5 and Polymer Institute paint compatibility test
- Test Report P 5541
- August 2008
- Mercedes Benz -standard PBODC380
- PBVCE380 (paint wetting impairment substances (PWIS)) silicone-like
- varneability Test Report according to * HQM GmbH
- VPT-Nr. 07LL165
- 04.2008
- Spark resistance test of coatings in accordance with UFGS-09 97 23
- Test Report P 8625-E
- Kiwa Polymer Institut
- Cleanroom Suitable Materials Approval
- Sikafloor®-235 ESD meets the requirements of LEED EQ Credit 4.2: Low-Emitting Materials: Paints & Coatings SCAQMD Method 304-91 VOC * Content <100 g
- l
Industrial Flooring
Request a quote for this product
Sika
Sikafloor®-235 ESD