Megaİzo Lastik 10 S103
Overview
It is a fully elastic waterproofing material consisting of cement-based powder component and polymer emulsion-based liquid component, which can be applied before the top coat material, suitable for use in drinking water tanks.
Technical Specifications
- - Performance
- - Initial adhesion strength: ≥ 0.5 N/mm² TS EN 14891 : A.6.2
- - Adhesion strength after contact with water: ≥ 0.5 N/mm² TS EN 14891: A.6.3
- - Adhesion strength after heat aging: ≥ 0.5 N/mm² TS EN 14891: A.6.5
- - Adhesion strength after freezing - thawing cycle: ≥ 0.5 N/mm² TS EN 14891: A.6.6
- - Application Limits
- - Pot life: Maximum 3 hours
- - Waiting time between floors: Minimum 6 hours
- - Time required for application: Minimum 3 days
- - Mixing ratio
- - The powder component (20 kg) and the liquid component (10 kg) must be mixed completely.
- - Consumption
- - Recommended consumption amount for 2 mm film thickness; It is 3.0 – 3.8 kg/m2. This value may vary depending on the surface and ambient conditions.
Product Features
| Usage Location |
|
|---|---|
| Documents, Certificates and Compliance |
|
| Product Physical Properties |
|
| Durability, Lifespan and Maintenance Properties |
|
Application Areas
- - It is applied before coating materials such as ceramics as a waterproofing material in wet areas such as bathrooms, kitchens, balconies, terraces, pools and water tanks. It is used indoors and outdoors, on horizontal and vertical surfaces.
Documents
- TSE
- CMO2P
- CE
KYK Construction Chemicals Products
Waterproof Mortar
Request a quote for this product
KYK Construction Chemicals
Megaİzo Lastik 10 S103