☎ Contact Us · +90 (850) 303 27 83
Yapı Kataloğu light+intelligent süper eng

MegaFuga Flex D103

Overview
Cement based, elastic and antibacterial joint filler with high polymer additive, which is suitable for application to joint gaps, ranging between 2 and 10 mm, in indoors and outdoors spaces, and is resistant to temperature changes and also water resistant.

Technical Specifications

  • - Performance
  • - High abrasion resistance: ≤ 1000 mm³ TS EN 12808 - 2
  • - Bending strength after dry storage: ≥ 2.5 N/mm² TS EN 12808 - 3
  • - Bending strength after freezing - thawing cycles: ≥ 2.5 N/mm² TS EN 12808 - 3
  • - Compression strength after dry storage: ≥ 15 N/mm² TS EN 12808 - 3
  • - Compression strength after freezing - thawing cycles: ≥ 15 N/mm² TS EN 12808 - 3
  • - Contraction: ≤ 3 mm/m TS EN 12808 - 4
  • - Reduced water absorption after 30 minutes: ≤ 2 gr TS EN 12808 - 5
  • - Reduced water absorption after 240 minutes: ≤ 5 gr TS EN 12808 - 5
  • - The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions.
  • - Application Limits
  • - Useful time for prepared mortar - Pot life: Maximum 1.5 hours
  • - Drying time: Minimum 12 hours
  • - Opening the traffic: 24 - 48 hours
  • - The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions.
  • - Technicial Specifications
  • - Chemical Structure: Cement based joint filler with polymer additive
  • - Dry Density: 1.20 ± 0.05 gr/cm³
  • - Mortar Density: 1.80 ± 0.05 gr/cm³
  • - Grain Size: ≤ 150 µm
  • - Color: Color charts
  • - Temperature Resistance: -150C to +80+C

Product Features

Usage Location
Is it an indoor product?
Yes
Is it an outdoor product?
Yes
Documents, Certificates and Compliance
Does it have a TSE certificate?
Yes
Does it comply with EN / ISO standards?
Yes
Is it antibacterial?
Yes
Is it suitable for high-traffic areas?
Yes
Is it moisture resistant?
Yes
Product Physical Properties
Binder / base type
Cement-Based
Durability, Lifespan and Maintenance Properties
Is it resistant to abrasion?
Yes
Is it resistant to freeze-thaw cycles?
Yes

Application Areas

  • - MegaFuga Flex is suitable for use on all types of coating with joint gaps, ranging between 2 to 10 mm, on such floors applied with ceramic, natural stone, granite ceramic, marble etc., on such wet areas as bathrooms, terraces, on such floors with floor heating, where extremely high temperature changes occur, on such floors that are exposed to busy pedestrian traffic and on horizontal and vertical joint gaps in indoors and outdoors spaces.
Joint Sealants
Request a quote for this product
MegaFuga Flex D103
MegaFuga Flex D103
KYK Construction Chemicals
STEP 1 / 2
Phone or email — enter at least one
⏱ avg. reply ~4 hours · straight to the company representative