☎ Contact Us · +90 (850) 303 27 83
Yapı Kataloğu light+intelligent süper eng

Metallic Paste System Product Group

Overview
PM901 METALLIC PASTE SYSTEM is a paste system that is prepared to give decorative metallic and mother-of-pearl effects and offers design freedom to its users. It can be applied to primed or painted surfaces. It is concentrated and solvent based.

Technical Specifications

  • - It provides convenience in application with its compatibility with polyurethane, acrylic and cellulosic systems.
  • - It is possible to reach rich metallic color tones with applications made using Gençmix colors. PM901 Metallic and Pearlescent Pastes can optionally be colored with ZD900 GENÇMIX colorants.
  • - Gold, bronze, silver and mother-of-pearl patina effects can be obtained by mixing with VO901 Patina Base.
  • - APPLICATION METHODS
  • - VA901.10 1K ACRYLIC BASE & VN100. XX CELLULOSIC SYSTEM APPLICATION
  • - On white or colored surfaces covered with young primer or paint; Application is made by adding 1--20% PM901 Metallic Paste and 1-5% Mother-of-Pearl Paste into VA901.10 1K Acrylic Base and VN100.XX Cellulosic Varnish. It is ready to use. There is no need to add extra thinner. VA901.10 1K Acrylic Base or VN100 with 1-20% Silver Paste, 1-3% Mother of Pearl Paste from PM901 METALLIC PASTE SYSTEM. Different colors and effects can be obtained by adding 1-5% of ZD900 GENÇMIX colors into XX Cellulosic Varnish. Applications of the same color on different ground colors will enable you to capture various color tones.
  • - 2K APPLICATION
  • - In case of using two-component products (Acrylic Varnishes: VA500. XX, VA503.XX Polyurethane Varnishes: VP595.XX, VP509. XX, VP508.XX Tinting System: CP558.XX.0000), the desired effect is created by creating the following application conditions. receivable:
  • - Gun pitch angle: min 45°
  • - Gun pressure: min 15 cm
  • - Distance between gun and application surface: max 3 bar
  • - Application weight: min 70 g/m2
  • - Note: Application weight may vary depending on the ground color and metallic paint color. If necessary, it should be applied as 50 + 50 g/m2 in two coats.
  • - PAINT APPLICATION
  • - PM901 Metallic Pastes are mixed with 10-15%, Pearl Paste 3-5% with VO901 Patina Base and applied. It is waited for 10-15 minutes for the wood to penetrate into the grain. After the surface dries, it is sanded with 320 grit sandpaper so that the product in the veins comes to the fore. The preferred topcoat varnish is applied on it.

Application Areas

  • - In interior furniture and decoration works that will reflect the sparkle of your design ideas, on white or colored surfaces covered with youthful primer or paint,
  • - It can also be used on all kinds of wooden surfaces such as solid and veneer with youthful filler varnish.
Decorative Paints
Request a quote for this product
Metallic Paste System Product Group
Metallic Paste System Product Group
Kayalar Kimya
STEP 1 / 2
Phone or email — enter at least one
⏱ avg. reply ~4 hours · straight to the company representative