☎ Contact Us · +90 (850) 303 27 83
Yapı Kataloğu light+intelligent süper eng

Volimax | Hollow Slab Blind Mold

Overview
The hollow slab system is a system that reduces the weight of the slab and increases the earthquake performance of the building without compromising the performance characteristics of the non-beam (cork) slab. Beamless hollow slab distributes the design loads to the four sides and transfers them to the columns/walls or beams. Hollow slab blind molds form a matrix of 𝙸 beams running in both directions in the slab.

Technical Specifications

  • - Width and length: 52×52 cm
  • - Height:
  • - Single use 10, 13, and 16 cm
  • - Double, triple and quadruple use 10, 13 and 16 cm combinations
  • - Center cone concrete observation hole
  • - 2 cm spacer integrated into the mold
  • - Conical leg heights varying between 7-12 cm
  • - Made from recycled polypropylene

Product Features

Documents, Certificates and Compliance
Can it be used in systems compliant with earthquake regulations?
Yes
Does it provide sound insulation?
Yes

Application Areas

  • - Hollow slab is obtained by placing blind molds made of recycled polypropylene (PP) between the lower and upper reinforcement in such a way that the slab runs in both horizontal directions and pouring the concrete in place.
  • - The products are placed at the intervals specified in the project and connected to the lower reinforcement. After the upper reinforcement is placed, concrete pouring begins. The most important point to be considered while pouring concrete is to pour the concrete in two times so that the products do not float, but not to allow the formation of cold joints between the two castings. In the first casting, the concrete is poured until it completely covers the edges of the blind molds. According to the class of the concrete and the weather conditions, when the concrete is slightly plasticized and reaches a consistency that will not allow fingers to enter, the second casting is performed and the flooring production is terminated. Vibrator should be used at every stage of concrete casting.

Material Information

PP
Slab Formwork
Request a quote for this product
Volimax | Hollow Slab Blind Mold
Volimax | Hollow Slab Blind Mold
ABS YAPI
STEP 1 / 2
Phone or email — enter at least one
⏱ avg. reply ~4 hours · straight to the company representative