Web sitemizde size en iyi deneyimi sunabilmemiz için çerezleri kullanıyoruz. Sayfamızı ziyarete devam ederek çerez kullanımını onaylamış olacaksınız. Usage and Privacy

Injection Waterproofing

The injection of polyurethane (or silicate, epoxy) based resins using high pressure pneumatic pumps and packers, into gaps and cracks in the structures. The mixture then reacts and in turn expands and toughens, stopping water flowing through these structural joints and cracks. Best used in waterproofing and stabilization purposes structures such as tunnels, subways and dams. The Packers are placed in drilled holes drilled at slanted degrees to intersect the interior around the cracks and gaps allow the resin to infiltrate deep into the most inaccessible areas. Our single or double chamber high pressure pneumatic pumps are designed for easy maintenance, highly reliable and very easy to use.


Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Injection Waterproofing product.

Offer Request Add to Panel
Tag:
Foundation insulation Soil injection Waterproofing
About the Product
1Specifications

• WISIN® PUR SR Fast reacting single-component injection resin
WISIN® PUR SR is a high-efficient single-component system for sealing water leakages with high water flows. The product can be used to fill cavities in rock cracks, for soil stabilization and anchoring in gravel. The reaction times can be adjusted with a concerted amount of WISADD® SR.

• WISIN® PUR FX Flexible single-component resin for gap injection
WISIN® PUR FX is a dark brown water-reactive liquid. The final product is characterized by high flexibility and elasticity. When it comes into contact with water, it expands and quickly cures to a tough, flexible, closed-cell polyurethane foam. The reactivity depends on temperature and the amount of accelerator WISADD® FX.

• WISIN® PUR NV Low viscous single-component resin for soil stabilisation
WISIN® PUR NV is a dark brown, low viscous liquid. It is used for stabilising loose soils or to increase the load bearing capacity of these soils. When it comes into contact with water, it reacts and cures to a rigid polyurethane. The reactivity depends on temperature and the amount of the catalyst WISADD® NV.

• IZOPUMP 1K Single Component Electric Pneumatic Injection Pump
Izopump 1K is a high performance and ease to use model, mostly due to its high flow rate and special ergonomic design. Utilising professional motor powered equipment, it is best choice for the reliable injection specialist.Designed especially for easy and fast injection of single component polyurethane and epoxy synthetic resin to the concrete structures. Despite being very compact and powerful, it develops pressure gradually pumping 850 ml per minute, is extremely light weight and easy to carry along even in asement or confined areas. In addition to the suction hose and 3,5 LT reservoir tanks being detachable, making it easy to maintain and cleaning conveniently.

• IZOPUMP 1K 500 Single Component Electric Pneumatic Injection Pump
Despite its small size, the Izopump® 1K 500 offers superior performance.39 cm X 20 cm X 43 cmDesigned especially for easy and fast injection of single component polyurethane and epoxy synthetic resin to the concrete structures. Despite being very compact and powerful, it develops pressure gradually pumping 600 ml per minute, is extremely light weight and easy to carry along even in basement or confined areas.In addition to the suction hose and 2 LT reservoir tanks being detachable, making it easy to maintain and cleaning conveniently.

• TRUVAPUMP 1K AIRLESS 2.4 Single Component Electric Pneumatic Injection Pump
HIGH FLOW RATE The Airless 1K 2.4 has higher flow rate.This is the professional machine for single component polyurethane and epoxy synthetic resin injection into the concrete structures. The pressure which is created can pumping 2400 ml per minute (2.4 litre/ minute), in this industrial robust, yet light weight and easy design simple for operate and maintain, and long product life. Along with the suction hose and 5 LT reservoir tanks, both detachable along easy maintenance and cleaning.

• TRUVAPUMP 1K AIRLESS 3.0 Single Component Electric Pneumatic Injection Pump
HIGH ENGINE POWER The Airless 1K 3.0 has higher engine power.This is the professional machine for single component polyurethane and epoxy synthetic resin injection into the concrete structures. The pressure which is created can pumping 3000 ml per minute (3 litre/ minute), in this industrial robust, yet light weight and easy design simple for operate and maintain, and long product life.Along with the suction hose and 5 LT reservoir tanks, both detachable along easy maintenance and cleaning.

• Aluminum and Steel Injection Packers
IZOPACKER injection packers allows the injection pump to inject the fluid component into the construction structure. These mechanical packers are suitable for repairing cracks and gaps using high pressure injection. These are placed in drilled holes drilled at slanted degrees to intersect the interior of the crack. The rubber sleeve at the end of the packer, allows it to seal the drilled concrete hole locking the packer in place. The material in the pump tanks is then delivered at pressures of several thousand PSI, ensuring that it seals the crack quickly, tightly and most important, forms the waterproof. The size (length) of the Packers depends on a crack’s depth and the volume of material, that we plan to administer.