Wood Protection System | Wood Impregnation

Modified alkyd resin based, non-film forming, U.V. rays resistant impregnation material.

Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Wood Protection System | Wood Impregnation product.

It is used in the impregnation of woods that are exposed to all atmospheric events or exposed to intense moisture. It can be used safely in wooden houses, windows, balconies, exterior doors, wooden fences and electric poles, paneling, wood of damp basements and similar places. It should not be used on beehives and wooden surfaces in saunas and woods containing unpackaged food materials. In addition, teak, iroko, etc. containing high amounts of natural oil. It should not be applied on wooden surfaces.

It increases the strength of the wood and creates a very good adherence surface for the varnish or paint that will come on it. It has short drying time, moisture regulator and excellent workability. It extends the life of the applied material.

Depending on the wood type and absorbency, it can be applied on an area of 8-12 m² with 1 liter in a single coat. Two coats application is recommended. There may be changes in color and consumption depending on the type of wood used, the condition of the surface, the coefficient to be applied and the method of application. A controlled sample study should be done for exact consumption.

It can be stored for 2 years at 5-30C in its unopened package, in a cool and dry place protected from frost and direct sunlight. Close the lid of the package immediately after use in a airtight manner. Use the opened product within 24 hours.

15 L, 2.5 L