Web sitemizde size en iyi deneyimi sunabilmemiz için çerezleri kullanıyoruz. Sayfamızı ziyarete devam ederek çerez kullanımını onaylamış olacaksınız. Usage and Privacy

CERMICOAT EP 2C

Brand: Cermix

Two components, solvent-free, epoxy based coating material


Please click on "Offer Request" button below to send your offer and detailed information request to the company for the CERMICOAT EP 2C product.

Offer Request Add to Panel
Tag:
Construction chemicals
About the Product
1Application Area

• Used as final coat on metal or concrete in factories, warehouses, shopping centers, workshops, aircraft hangars, schools,
hospitals, pharmaceutical sector, water tanks, food sector, laboratories, parking areas, treatment facilities, areas where heavy
forklifts and corrosive chemicals are used.
• May be used as wall coating to increase mechanical / chemical strength and also it can be applied if hygiene required for
walls.

2Material

Epoxy

3Specifications

• Density: Component A + B: ~ 1.65 kg / l (at +23 ° C) (DIN EN ISO 2811-1)
• Solid Content: ~ 100% (by volume) / ~ 100% (by weight)
• Mixing Ratio (A + B): 100/100 (by weight)
• Mechanical / Physical Properties:
Compression strength: Mortar: ~ 60 N / mm2 (28 days / +23 ° C) (EN 196-1)
Flexural strength: Mortar: ~ 30 N / mm2 (28 days / +23 ° C) (EN 178)
Adhesive strength:> 1.5 N / mm2 (pull out of concrete) (ISO 4624)
Abrasion Resistance: 50 mg (CS 10/1000/1000) 8 days / +23 ° C (DIN 53109 Taber Abrasion Test)
Shore D Hardness: 80 (7 days / +23 ° C) (DIN 53505)
• Application Conditions:
Surface temperature: not less than +10 ° C / not more than +30 ° C
Environmental temperature: not less than +15 ° C / not more than +40 ° C
Surface Humidity: Humidity 4 4%
Test method: measurement with HUMIDIFIER and THERMOMETER.
Relative Humidity: not more than 80%
• Condensation: There should not be condensation on the surface. The moisture film formed on the surface due to condensation prevents adhesion and the coating peels off.
• Application time:
Temperature +10 ° C / Time ~ 60 minutes
Temperature +20 ° C / Time ~ 30 minutes
Temperature +30 ° C / Time ~ 15 minutes
• Mixture Life:
Temperature +23 ° C / Time ~ 30 minutes
NOTE: These tests were carried out under laboratory conditions using 200 g of mixture. Times are approximate. Changing ambient conditions will be particularly affected by temperature and relative humidity.
• Waiting Time Between Floors:
Substrate Temperature +20 ° C / Not less than 10 hours / Not more than 48 hours