Web sitemizde size en iyi deneyimi sunabilmemiz için çerezleri kullanıyoruz. Sayfamızı ziyarete devam ederek çerez kullanımını onaylamış olacaksınız. Usage and Privacy

Microbeton | Fluoropal M TOP

Brand: Flooropal

It is a micro concrete optimized for industrial and storage facilities. With its high abrasion and compressive strength (40 MPa), the M Top provides the technical performance required for heavy load and heavy traffic conditions.

Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Microbeton | Fluoropal M TOP product.

Offer Request Add to Panel
Wall covering Wet area flooring Decorative floor coatings Floor coverings Levelling screed Shower surface Concrete planter Self-consolidating concrete Gross concrete coating
About the Product
1Application Area

FLOOROPAL M TOP is applied in new constructions and floors that need renewal. It is an ideal material for show rooms, shops or public areas that need to be completed or renovated very quickly, as well as industrial and storage facilities that are mostly required for high abrasion and pressure resistance, subject to heavy loads and traffic.


• FLOOROPAL M TOP enables industrial floors to be renewed by covering them with a long-lasting, high-strength and non-dusting CONCRETE without experiencing significant level problems.
• FLOOROPAL M TOP is applied quickly, allowing the application area to be put back into use quickly. Under normal conditions, it can be walked on 2-3 hours after the application is completed and it is opened for light load traffic after 24 hours and heavy load traffic after 7 days.
• With FLOOROPAL M TOP application, smooth and dust-free floors are obtained in its balance.
• FLOOROPAL M TOP combines fast curing, mechanical resistance and self-leveling properties with low shrinkage.
• FLOOROPAL M TOP is used without being covered. It can be colored if desired. It creates a smooth infrastructure for transparent or colored epoxy paint on it in food and health sectors where anti-bacterial properties are sought.
• MICROBETONS are classified as ENVIRONMENTALLY FRIENDLY “GREEN” products, as they are produced by using industrial by-products with hydraulic binder at a rate of at least 25% instead of cement, and do not contain toxic additives.