Exterior | Water Based Facade Protector


Water-based, siloxane-based, waterproof outer surface silicone impregnation material.


Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Exterior | Water Based Facade Protector product.


It is applied on all kinds of plaster, concrete, gas concrete and eternit natural surfaces in order to provide waterproofing, preserve breathability, prevent contamination and salt efflorescence. It is not recommended for use on natural stone, brick and similar surfaces.

FEATURES
Thanks to its strong silicone structure, it provides water impermeability. Provides high water repellency on absorbent outer surfaces. It is resistant to dirt, algae and fungal growth by keeping the surfaces dry. It prevents chalking by showing resistance to dissolved salts. It is resistant to UV and alkali and ends moisture on facades. Eliminates problems such as lime bleeding and rust bleeding. It prevents chemical corrosion caused by acidic gases. It prevents concrete damage due to corrosion and strength. It is effective against cracking caused by swelling and shrinkage.

CONSUMPTION
Depending on the type, absorbency and structure of the surface to be applied, an area of ​​2-5 m² can be painted with 1 liter in one coat. A controlled sample study should be done for exact consumption.

STORAGE
It can be stored for 3 years in its unopened package, in a cool and dry place, protected from frost and direct sunlight. Close the lid of the package immediately after use in an airtight manner.

PACKAGING
4 L, 1 L