Web sitemizde size en iyi deneyimi sunabilmemiz için çerezleri kullanıyoruz. Sayfamızı ziyarete devam ederek çerez kullanımını onaylamış olacaksınız. Usage and Privacy


Brand: Cermix

Brand: Cermix Joint filling material.

Please click on "Offer Request" button below to send your offer and detailed information request to the company for the CERMIJOINT 1-6 product.

Offer Request Add to Panel
insulation mortar Cement based joint sealant Joint fillers
About the Product
1Application Area

It is used for joints between ceramic in interior spaces, horizontal and vertical surfaces. When used with CERMILATEX, it is suitable for use in wet areas, terraces and large areas.


• Contains high quality cement, fine filler and water repellent agents.
• Water absorption amount (after 30 minutes): ≤ 5 g
• Water absorption amount (after 240 minutes): ≤ 10 g
• Moisture resistance: good
• Alkali resistance: good
• Acid resistance: good (for Ph> 3 acids)
• Temperature resistance: -30 ° C - +70 ° C
• Flexural strength: ≥ 2.5 MPa (N / mm2)
• Flexural strength (freeze-thaw): ≥ 2.5 MPa (N / mm2)
• Compressive strength: ≥ 15 MPa (N / mm2)
• Compressive strength (freeze-thaw): ≥ 15 MPa (N / mm2)
• Abrasion resistance: ≤ 2000 mm3
• Shrinkage value: ≤ 2 mm / m
* These values were obtained as a result of laboratory tests and are the performance values of the finished applications after 28 days. Values may vary due to the difference in the construction site environment.

3Quality Assurance Certificates

TS EN 13888 / CG1 class