Ceramic Adhesive

Kalekim 1051 ceramic adhesive mortar is a cement-based ceramic adhesive mortar with reduced slip and long working time.

Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Ceramic Adhesive product.

Indoor and Outdoor

• It has high adhesion strength.
• It is suitable for ceramic flooring from top to bottom. It doesn't slip.
• It saves time and labor with its long working time.
• It can be easily combed.
• Technical specifications
- 23°C and 50% RH
• General Information
- Appearance: Gray powder
- Shelf Life: 12 months in dry conditions in its unopened package.
• Application Information
- Application Temperature: (+5°C) - (+35°C)
- Mixing Ratio: 6.5-8 lt water / 25 kg powder 1.3-1.6 lt water / 5 kg powder
- Pot Life: 6 hours
- Slip (EN 1308): ≤ 0.5mm
- Open Waiting Time (EN 1346): At least 30 min. then ≥ 0.5 N / mm²
- Commissioning Time: 8 hours on wall - 1 day on floor
- Consumption: Average 3-5 kg/m²
• Performance Information
- Adhesion Strength (EN 1348)
- Initial: ≥ 0.5 N/mm²
- After Immersion: ≥ 0.5 N / mm²
- After Heat Aging: ≥ 0.5 N/mm²
- After Freeze-Thaw Cycle: ≥ 0.5 N / mm²
- Temperature Resistance: (-40°C) - (+80°C)
- Hazardous Substances (EN 12004): Suitable
- Reaction to Fire: A1
• Application Instruction
- The surface must be cleared of residues that will prevent adhesion. Care should be taken to ensure that the surface is cured and sound.
- The defects on the surface should be corrected with TAMIRART or MASTAR 10.
- The dusty surface behind the ceramic should be moistened and wiped.
- 25 kg of KALEKİM should be poured into 6.5-8 liters of water slowly and mixed until a homogeneous mixture is obtained. Mixing should be done with a low speed mixer. Any additives not specified in the application instructions should not be added.
- The prepared mortar should be rested for 5-10 minutes to mature. It should be mixed again for 1-2 minutes before starting the application.
- In order to obtain a better adhesion surface, after the mortar is spread on the surface with the flat part of the trowel, it should be combed with the toothed part of the trowel selected in accordance with the tile size.
- Tiles should be adhered by applying force on the notched mortar within 30 minutes. This period may be shortened in applications made under unsuitable ambient conditions such as high temperature, low humidity, and wind. Adhesion should not be done on the expired mortar, the mortar should be scraped from the surface.
- Expired or crusted mortar in the container should be discarded. After application, hands and application tools should be washed with plenty of water. Surfaces should be cleaned with a damp cloth.
- Tiles adhered with KALEKİM should be avoided for at least 24 hours in direct contact with water.