Plaster Boards | Intreme Moldstop
Intreme Moldstop is the only 7 kg/m2 moisture and mold resistant indoor lightweight plasterboard in the industry. By combining moisture and mold resistance, it provides enhanced protection against mold growth by creating antimicrobial resistance in gypsum particles and plasterboard surface. It is a special building material for interior spaces where fire resistance is required for building safety. There is no need to use different types of plates to lighten the load of the building. It is cut more smoothly and easily, it saves time with faster and easier assembly. It has the ability to adapt to movement. Despite being lighter, it exhibits improved sag resistance.
Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Plaster Boards | Intreme Moldstop product.
It is used in the production of partition walls and suspended ceilings in interior spaces. It helps to extend the life and appearance of interior surfaces when used in areas with high humidity and humidity levels such as bathrooms, kitchens, laundry rooms, gyms, basements.
Length (mm): 2000 - 3600
Density (kg / m³): 560 ± 40
• Weight (kg / m²): 7.0 ± 0.5
Product Type: Type H1
• Reaction to Fire Class: A2, s1-d0
Coefficient of resistance to water vapor transmission (µ): 10
• Thermal conductivity value (ƛ) (W / (m ∙ K): 0,25
• Bending Breaking Load (N): Long-edge Direction (N) ≥ 550 - Short-edge Direction (N) ≥ 210
Total Water Absorption (%): H1 ≤5
Surface Water absorption (gr / m²): H1 <180
Width tolerance (mm): 0, - 4
Length tolerance (mm): 0, - 5
• Thickness tolerance (mm): ± 0.5
• Deviation of short sides from perpendicularity (mm): <2.5
Thinning Depth (mm): 0.6 - 2.5
Thinning width (mm): 40 - 80
Edge Type (mm): HR (Thinned Edge) -KK (Blunt Edge)
• Resistance to Mildew (Points): 10 * ASTM D 3273-12
TS EN 520 + A1