Web sitemizde size en iyi deneyimi sunabilmemiz için çerezleri kullanıyoruz. Sayfamızı ziyarete devam ederek çerez kullanımını onaylamış olacaksınız. Usage and Privacy

Plaster Boards | Intreme FIT Moldstop

Brand: ABS Alçı

By combining moisture and mold resistance, Intreme FIT Moldstop provides enhanced protection against mold growth by creating antimicrobial resistance in the gypsum grains and gypsum board surface. Since it weighs only 5.8 kg / m², it provides advantages in many areas from transportation to assembly. With its reinforced chamfered edges, it is as durable as much heavier plates than itself. Thanks to its flexibility, it can be adapted to movement and can be easily applied in any design. Despite being lighter, it has the same breakage and sag resistance. When used with suitable insulation materials, it provides high sound and heat insulation performances.


Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Plaster Boards | Intreme FIT Moldstop product.

Offer Request Add to Panel
Tag:
Gypsum board Gypsum board profile
About the Product
1Application Area

It helps to minimize permanent moisture and microbial growth on interior walls and ceilings and positively affects health. It helps to extend the life and appearance of interior surfaces when used in areas with high humidity and humidity levels such as bathrooms, kitchens, laundry rooms, gyms, basements.

2Specifications

• Product type H1
• Reaction to fire class A2, s1 – d0
• Coefficient of resistance to water vapor transmission (µ) 10
• Thermal conductivity value (ƛ) 0.25
• Length (mm) 2000 – 3600
• Thickness (mm) 12.5
• Density (kg/m³) 464 ± 16
• Weight (kg/m² ) 5.8 ± 0.2
• Bending Fracture Load (N): Long side direction (N) ≥ 550 / Short side direction (N) ≥ 210
• Total Water Absorption (%) H1≤5
• Surface Water absorption (gr/m²) H1<180
• Width tolerance (mm) 0, – 4
• Length tolerance (mm) 0, – 5
• Thickness tolerance (mm) ± 0.5
• Deviation of short sides from perpendicularity (mm) < 2.5
• Thinning depth (mm) 0.6 – 2.5
• Thinning width (mm) 40 – 60
• Edge type HR (Tapered Edge) KK (Short Edge)
• Mold Resistance (Points) 10*